|
Malcolm Smith
Power Cleaning 45 Roundponds Melksham Wiltshire SN12 8DW 01225 707200 (Monday - Friday 8.00am - 6.00pm Saturday 8.30am - 12.30pm) |
DYNAFOG Mister III DH2630 Will handle all formulations, throws 45 mtrs and is ideal in situations where a high output is required. Removable 11.4 ltr plastic tank and can be connected to large drum kit. Ideal for blocks up to 4000m2 (1 acre) and where heavier wettable powders are used. Mister III has the versatility to dispense fungicides, insecticides, germicides and disinfectants as; wettable powders, emulsifiable concentrates, flowables or liquids in a variety of applications: greenhouses, warehouses, food processing plants, swine/poultry houses and much more. With a formulation output of 12 gallons per hour, Mister III has power enough to produce small particles and effectively disperse them evenly over large areas for fast, economical and total coverage. The machine is equipped with an easy to clean stainless steel formulation filter that keeps the system free of unwanted dirt and residue.yet has large enough openings in the filter to enable use of wettable powders and flowables. Dispenses wettable powders, emulsifiable concentrates and flowables with a non- flammable carrier at a rate of 12 gallons per hour. A thermal fogger is appropriately named since it is a device that uses heat to produce a fog without degrading the active ingredient. A thermal fogger produces a range of droplet sizes including a large number of very small droplets. This makes a thermal fogger the preferred type of equipment to reach air spaces in areas highly obstructed by vegetation, or other physical obstructions in buildings. The large number of very small droplets produced in a thermally generated fog also make the fog highly visible. This can help the operator to monitor the fog and ensure thoroughness of application. Type: Thermal aerosol-fog, resonant pulse principle Code: DYNAA Most biologically active chemicals (insecticides, fungicides, disinfectants and deodorizers) will give their best results if applied in small droplets between 10 and 100 microns in size, according to chemical type. However, droplets in this size range are highly susceptible to being drifted long distances by wind. This is why most outdoor (agricultural) spraying is done using droplets of 200 to 400 microns. Where wind drift is advantageous, or in a closed building, smaller droplets can be utilized to maximize the efficacy of the chemical and reduce application costs. Delivery Charges: |
Quick Links
![]() ![]() ![]() |






