15 Lpm at 200 Bar Electrically Heated Pressure Washer Kranzle 48kw K900EM48

15 Lpm at 200 Bar Electrically Heated Pressure Washer Kranzle 48kw K900EM48 KRANZLE Part No: K900EM48 Volts: 415 Lpm: 15 Bar: 200 48 kw Max operating pressure 200 bar (~3300 psi adjustable) Nozzle size 25055 Water flow up to 15 Ltrs/Min. Max. hot water output 80c High pressure detergent facility Automatic stop start. Water flow detection safety system. Anti superheating safety thermostats fitted as standard. 10m twin wire long life hose on integrated hose reel Optional non marking hygiene hose. Supply 415v 3ph 50 Hz 48kw heating power Dimensions 790 x 590 x 980 mm (without reel) No pre heating time required. Continuous hot water output. Water is heated after the pump These machine are built to the highest standards. Post pump heating gives three clear advantages over conventional 'kettle' type hot water pressure washers. These Therms have low maintenance needs and are very cost effective. Good design and rugged construction makes this probably the most reliable electrically heated cleaner on the market. The mobile Therms are also available without the hose reel. By using special high pressure heating coils you do away with the need to switch the machine on 15 minutes before you want to use it as the water is heated as it passes though the pressure washer. These special high pressure heating coils are after the high pressure pump so the pump seals, O rings and valves are not affected by the hot water. The other advantage with this system is that you have hot water at a constant temperature because the hot water is not being cooled down by cold water entering a tank. On the 600/601 models the pump produces up to 2400 psi (160 Bar) with a maximum water flow of 10 Ltrs/min 24kw will heat the incoming water by a constant 35 degrees centigrade at maximum flow and pressure 36kw will raise the water temp by a constant 50 degrees, assuming inlet water temperature is 10 deg that would give you 60 degrees output at maximum flow/pressure (Pressure and flow can be reduced on all models to increase the output temperature) On the 900 model you can have 15 Ltr/min at approx 3000 psi (200 Bar) or the machine can be set to 10 Ltr/min 48kw will raise 15 Ltr/min by a constant 46 degrees at maximum pressure and flow 48kw will raise 10 Ltr/Min by a constant 70 degrees, so a cold water supply at an ambient temperature of 10 degrees would be heated to the maximum of 80 degrees. The maximum output temperature on all models is set to 80 degrees for safety reasons. Electrically heated Therms are easy to use, versatile and have long life expectancy. Every effort has been made to make a machine that is the best on the market and yet still be affordable.

Delivery Charges:
To UK Mainland (excluding Highlands & Islands)
Orders up to £49.99 - Carriage £4.99
Orders from £50.00 < £99.99 - Carriage £10.99
Orders from £100.00 < £199.99 - Carriage £13.99
Orders from £200.00 < £299.99 - Carriage £16.99
Orders from £300.00 < £399.99 - Carriage £19.99
Orders from £400.00 < £599.99 - Carriage £22.99
Orders over £600.00 - Carriage £25.99