19 Lpm at 160 Bar Hot Pressure Washer Kranzle K1160

19 Lpm at 160 Bar Hot Pressure Washer Kranzle K1160 KRANZLE Part No: K1160 Volts: 415 Lpm: 19 Bar: 160 Nozzle Size: 045 Kg: 220

Pick ADDONS for: K1160T with 20m of Hose &

Reel when buying this product

• Operating pressure 160 bar/2300 psi fully adjustable (4600 epsi equivalent pressure with the optional DirtKiller at max temp of 80oc) Nozzle size 2507 Water flow 1160 Ltrs/Hr. @ 1400 rpm Hot water output up to 90c

Steam stage up to 150oc High pressure chemical/detergent facility Automatic stop start by use of the trigger gun Delayed shut down Pre purging of burner reducing exhaust Low fuel safety feature Burner shut down by exhaust over temperature sensor 10m twin wire long life hose Available with 20m high pressure hose and reel Supply 415v 12.5 amps 3ph 50 Hz Connection load 7.5 kw Motor output 5.1 kw (7 HP) Weight 220 kg Dimensions 800 x 1200 x 1050 mm (without reel) This is a large machine with a big output, high flow with maximum heat generation enables this machine to tackle tasks requiring weight of water to shift heavy deposits of dirt. Low maintenance needs, good design and rugged construction makes the Therm probably the most reliable steam cleaners on the market. The 1160T offers excellent value for money and will give years of service. Also available with hose reel and 20m of hose in place of standard 10m. This is a BIG machine built to very high standards for the most demanding of environments. Low maintenance needs, good design and rugged construction makes the Therm probably the most reliable steam cleaner on the market. High pressure and high heat output gives the very best results where dirt needs blasting off. The 890T offers excellent value for money and will give years of service. To appreciate the size and quality of the Therm it really needs to be seen. The Therm is a big, solid and very well made machine that weighs over 200 kgs. The boiler or combustion chamber of this machine is probably the best in use on any make of mobile steam cleaner. The casing is actually machined out of 1/4 inch galvanized plate steel, not formed out of a thin tin like material. The flame chamber is within an inner cylinder so that the flame does not directly touch the coil. This refinement eliminates sooting up - a common problem with steam cleaners that leads to smokey exhaust, poor efficiency and higher servicing costs.

The Kranzle coil has a huge surface area of over 22 square feet and because both the fuel and air are pre-heated, combustion of the fuel and heating of the water are highly efficient. Care and simple maintenance are taken into account on the Therm, every machine is fitted with both an easy to clean fuel filter and a fuel pressure gauge. Low fuel cut out is standard as is pre-purge venting.

Therms have adjustable pressure up to 2750 psi on 415v 3ph. The output temperature is also adjustable with a steam stage of up to 150oC. Detergents can be used at high pressure giving the maximum cleaning combination of high temperature, high pressure and chemical. When you let go of the trigger gun theTherm will run in by-pass mode for 20 to 30 seconds so that you have instant high pressure when you pull the trigger. If you are taking a break in cleaning, the machine will switch off to stand by mode but will restart when you go back to it and squeeze the trigger again.

Delivery Charges:
To UK Mainland (excluding Highlands & Islands)
Orders up to £49.99 - Carriage £4.99
Orders from £50.00 < £99.99 - Carriage £10.99
Orders from £100.00 < £199.99 - Carriage £13.99
Orders from £200.00 < £299.99 - Carriage £16.99
Orders from £300.00 < £399.99 - Carriage £19.99
Orders from £400.00 < £599.99 - Carriage £22.99
Orders over £600.00 - Carriage £25.99