25 Lt Can Limestone After Wash C12325

25 Lt Can Limestone After Wash C12325 25 Lt Can -



Limestone Afterwash is a mild organic acid cleaning compound used to neutralize & brighten surfaces that have been pre-washed using an alkaline cleaner, will not damage most masonry surfaces. Part No: C12325



Does not contain hydrochloric or hydrofluoric acid. Always test first. Dilute one part fresh water to one part concentrated cleaner before application. -



Pour water into empty bucket, then carefully add Limestone After-wash. Never pour water into the cleaner. -



Allow the Afterwash to remain on the surface for 3 to 5 minutes. - Pressure rinse from the bottom of the treated area to the top. - Make sure to cover each portion of the masonry surface with the concentrated stream of water. To avoid streaking, keep wall surfaces immediately below area being cleaned running wet and free of cleaner rundown and residues.



Contains: Acetic Acid. Not suitable for use on polished Marble, polished Travertine, polished Limestone or polished Granite.

 

Always test each type of surface and stain before overall application to ensure suitability, dilution rates and desired results.



Allow area to dry thoroughly before inspection and approval. Limestone Afterwash is available in the following SIZES: C12305 5 LT CAN C12325 25 LT CAN

Delivery Charges:
To UK Mainland (excluding Highlands & Islands)
Orders up to £49.99 - Carriage £4.99
Orders from £50.00 < £99.99 - Carriage £10.99
Orders from £100.00 < £199.99 - Carriage £13.99
Orders from £200.00 < £299.99 - Carriage £16.99
Orders from £300.00 < £399.99 - Carriage £19.99
Orders from £400.00 < £599.99 - Carriage £22.99
Orders over £600.00 - Carriage £25.99