Guide to ELECTRIC PRESSURE WASHERS - Electric pressure washing - Electric Jet Washers - Electric Jetting Equimpmet

Malcolm Smith
Power Cleaning
45 Roundponds
Melksham
Wiltshire
SN12 8DW
01225 707200
(Monday - Friday 8.30am - 5.00pm
Saturday 9.00am - 12.00pm)

Guide to:-

Single Phase - ELECTRIC PRESSURE WASHERS

For 3 Phase Machines - click here

Please use the BLUE LINKS to take you to the related product where you will find more info & Prices.

* 1 Bar Pressure = 14.5 psi

Note:- You cannot GET MORE OUT THAN YOU PUT IN!

If you run "ANY MAKE" of pressure washer from a 13 amp socket you can only convert this into about 10 lpm flow at about 135 Bar.
To get more flow and/or pressure you need a three phase supply (415 volts) or an engine driven machine.
If you use an "extension lead" you must keep it as short as possible and it needs to be a heavy one - 2.5mm2 cable.
We supply Kranzle Pressure Washers - Why - They are distinguished by their extraodinaily high quality, extremely modern design, high grade material, long service life and economic efficiency. - The heart of each high-pressure washer is the pump. The Kranzle pump heads are made completely of forged brass to ensure top quality and long service life.
Plus the fact that I (Malcolm) likes a simple life - when we sell a Kranzle Pressure Washer we know that it will give very good service and this means less telphone calls and more time to go fishing!

Have a look at FOOD FOR THOUGHT !
- click here

Cleaning Power Guide
What is - “Cleaning Power Guide”
It is just a guide to compare machines (if you take the flow in lpm x Pressure in Bars and divide by 600) this will give you a number to compare machines – It’s not set in concrete but it’s not a bad guide.
However when using HOT water then things are a bit different – the cleaning power goes up.

Which Machine ?
Q-1) What do do you want to do with it ?
Q-2) How much do you want to spend ?

A-1) For cleaning the car and odd jobs where the machine is not running for long times then a machine with a motor speed of 1450 or more is OK
A-2) If you intend to use the machine for times of an hour or more then go for a machine that runs at no more thar 1450 rpm. A slower machine will alwasy suck water into itself better.

Two Free Tips !
1) Dont run you pump with less water that the pump requires (this buggers up more pumps that anything else)
2) Always use a GOOD HEAVY extension lead if you have to use one (at least 2.5mm2 cable)


Oertzen- 312 Profi
Single Phase - 230v
Cleaning Power Guide - 2.91
10m High pressure Hose, High Pressure Gun, Twin Lance & nozzle.	*A powerful single phase machine to be "Hard wired into a 16 amp supply or used from a suitable 16 amp plug & socket"* HEAVY DUTY Mobile cold water high pressure cleaner with 170 bar working pressure, flow rate 620 l/h, driven with alternating current 230 Volt, serially equipped with 10m JET-high pressure hose (300 bar), with hose swivel, spray pistol, turnable screw fitting, insulating handle, double spray wand with pressure regulation, HIP-nozzle, 4m electric cable. This must be wired into a 16 Amp Supply
	Part No:	lpm	Bar	Pump Speed (rpm)	kw	Weight (kg)	Dimensions (l x w x h mm)
	*312PROFI*	10.3	170	1420	3.5	38	500 x 280 x 310
*Click on Part Number for MORE DETAIL & PRICE*
See OERTZEN Video - *click here*
Oertzen Accessories - click here
To turn this into a HOT MACHINE use - Heating module HOT BOX 200 - Extra