|
Malcolm Smith
Power Cleaning
45 Roundponds
Melksham
Wiltshire
SN12 8DW
01225 707200
(Monday - Friday 8.30am - 5.00pm
Saturday 9.00am - 12.00pm)
|
SPECK Pressure Washer Pumps
P80 RANGE / P80 SERIES
For SPARES for this SPECK PUMP - click here
| P80 |
 |
Performance
| |
Metric
|
Imperial
|
| |
l/min / Bar
|
gpm / psi
|
| Flow From |
100
|
74.9
|
| Flow To |
400
|
88.1
|
| Max Pressure |
500
|
7250
|
|
| |
| |
|
|
Type
|
The P80 is a 3 cylinder triplex pump.
|
|
Description
|
The Speck name is synonymous with quality and reliability. All our pumps are manufactured to the highest standards, using the latest in manufacturing technology.
The P80 Range of pumps upholds this quality by providing:-
- Crankcase of solid sphero- cast iron ensuring stability and vibration dampening.
- Drive available with integrated oil cooler for maximum load and continuous operation.
- Pump available with bare shaft, or with flange mounted reduction gear.
- Crankshaft and taper roller bearings together with plain con rod all run in oil.
- Solid Ceramic Plungers.
- Double plunger sealing.
- All gaskets in seal sleeves ensuring precise centring and easy replacement.
- Identical suction and discharge valves, easily accessible
|
|
Standard Models
|
| Model |
I/min
|
bar
|
rpm
|
kW
|
| P80/100-500* |
100
|
500
|
580
|
|
| P80/150-360* |
150
|
360
|
580
|
|
| P80/215-250* |
215
|
250
|
580
|
|
| P80/285-200 |
285
|
200
|
580
|
106.0
|
| P80/340-170 |
340
|
170
|
580
|
110.0
|
| P80/400-140 |
400
|
140
|
580
|
112.0
|
* Pumps Coming Soon
|
|
Special Models
|
|
|
Download
|
|
| Construction Characteristics |
- Crankcase of solid sphero- cast iron ensuring stability and vibration dampening.
- Drive available with integrated oil cooler for maximum load and continuous operation.
- Pump available with bare shaft, or with flange mounted reduction gear.
- Crankshaft and taper roller bearings together with plain con rod all run in oil.
- Solid Ceramic Plungers.
- Double plunger sealing.
- All gaskets in seal sleeves ensuring precise centring and easy replacement.
- Identical suction and discharge valves, easily accessible
|
| Materials Used |
| Valve Casing: |
Sphero cast iron. (Other Materials Available)
|
| Plunger: |
Solid Ceramic Plungers |
| Valves: |
Duplex Steel |
| Sleeves: |
Nitrile with fabric reinforcing |
| Crankshaft: |
Case hardened Cast Steel |
|
| Installation |
SPECK TRIPLEX Plunger Pumps are suitable for pumping clean water and other non-agressive or abrasive media with a similar specific weight to water.
Prior to pumping any other media, a check must be made to find out whether these pumps , taking pump performance and temperature values into consideration, are at all suitable for pumping the required medium.
Even though SPECK-TRIPLEX P80 pumps run almost pulsation-free, there are cases where a pressure accumulator is necessary. This will depend mainly on the construction of the unit and the conditions under which it is operated. The same effect can also be achieved by using flexible pressure lines. In any case, use of a pulsation damper adds considerably to the life of the seals and bearings. Particular care has to be taken when pumping warm water, making absolutely sure that cavitation can not occur.
|
|
Warranty
|
There is a 6 month warranty in accordance with VDMA guidelines. Pump operation without safety valve as well as any excess in temperature or speed limits automatically voids the warranty. The safety valve must be regulated in accordance with the guidelines for liquid spraying units so that the admissible operating pressure can not be exceeded by more than 10%. |
|
Speck Pressure Washer Pumps Series P80 - Information and exploded parts diagram for Speck Pumps P80 Series - P80Range
The HOME of Pressure Washers & Pressure Washing Spares - Jet Washers, Pressure Washing Equipment & Pressure Washer Spares & fittings. Oertzen water jetting equipment - Interpump pumps - Kranzle Pressure washers - Speck pump spares - Replacement UDOR pumps - Pressure washer accessories - nozzles, hose & surface cleaners.
|
Cart Details
|
(Approx 80 kb)
