December 17th is the last day to place orders, resuming on the 4th of Jan 2021

Hydraulic Range

Hydraulic Range of High Pressure Fittings

These fittings can be used for "Pressure Washers" - "Hydraulic Machines" - "Agricultural Hydraulics"

Guide to working pressure of fittings listed in this section.

Size (inches) 1/8" 1/4" 3/8" 1/2" 3/4" 1"
Nominal Bore (mm) 5 6.3 10 12.5 19 25
Working Pressure (Bar) 350 450 380 310 240 210

 

 

 

  • BSP Parallel Male Threaded Nipples
  • BSP Parallel x BSP Taper Male Nipple
  • BSP Taper Male Threaded Nipples
  • BSP x NPT Male Threaded Nipples
  • JIC Adaptors
  • Male Bulkhead Fittings with Nut
  • Male x Female Threaded Swivels Type
  • Female x Female Threaded Swivels Type
  • Female Threaded Pipe Coulpings
  • Male Threaded Elbow with Retaining Ring
  • Male BSP x Female BSP Threaded Elbow Swivel Type
  • Female BSP Threaded Elbow Swivel Type
  • Female Threaded Fixed Tees
  • Female Threaded Swivel Type Tees
  • Male Cone Plugs
  • 1/4" BSP Tubes Pre-cut & Threaded with 1/4" BSP Thread each end Zinc Plated & Stainless Steel Max Pressure - 400 Bar Max Temp - 150c Use these lance tubes to build up your own LANCE SYSTEM. Can also be used as part of a ... more info
  • Dowty Washers These are self centring seals availble in mild steel & stainless steel. (SS) Used to make a good joint when joining fittings together. They will fit the following thread size's:- DW18 & DW18SS = 1/8" BSP Thread DW14... more info
  • Dowty Washers Stainless Steel These are self centring seals availble in mild steel & stainless steel. (SS) Used to make a good joint when joining fittings together. They will fit the following thread size's:- DW18 & DW18SS = 1/8"... more info
  • Fitting Joint Sealant